Heat Bon compressor heater

HeatBone compressor heater is one of the required items in refrigeration, chiller and ventilation systems. The compressor needs oil when operating to keep the internal parts cool by reducing friction. If the compressor is turned off for a long time, the refrigerant gas condenses inside the crankcase chamber and causes the oil to foam in the crankcase. HeatBon heaters are used to prevent this situation. The heat of these heaters reduces wear and tear and thus increases the life of the compressors by preventing the movement of the refrigerant and its mixing with the oil in the compressor.

Highlights

Additional information

نحوه نصب

سریع، امن و آسان

تلورانس خروجی

+/- 10%

المنت‌ها

دارای المنت گرمایی با عایق سیلیکونی

مقاومت عایق

100 مگا اهم- 2500 ولت.

قسمت سرد

کابل 3×1.5 mm2 با عایق PVC

Place the heater at the bottom of the compressor where the oil collects.

Secure the heater around the compressor and make sure that the entire heated length is connected to the compressor body.

Close the clamp and tighten the screw on it. Connect the heater to the power supply via the existing cable.